KP Design® Pit Pass
KP Design® Pit Pass
🏁 Carries one 1:64 — the one you'd never risk leaving out
🧱 Real woven carbon fibre plate, not printed film
🔍 Clear on every face — sealed from dust and fingers
🔧 Builds in 5 minutes — both drivers in the box
🚗 Fits sports cars up to 22 mm tall (Car Not Included)
BUNDLE & SAVE
1:64 Scale Die-Cast Model Car
Shipping Protection
Couldn't load pickup availability
First batch - Pre order - Ships within 7 days
30-Day Money Back Guarantee
Try it at home for 30 days. If it's not for you, return it for a full refund — no questions asked.
📐 Specifications
📐 Specifications
Dimensions: 130 mm x 71 mm
Carbon plates: 3K woven carbon fibre, 5 mm combined
Chamber: laser-cut clear PMMA acrylic, 2 mm wall
Scale compatibility: 1:64 diecast
Fixings: M2 male-female self-locking screws, stainless
Lanyard: braided cord wrist strap with lobster clip
Power: none — no battery, no electronics
Car: not included
📦 What's In The Box
📦 What's In The Box
1x Carbon fibre front frame
1x Carbon fibre back plate
1x Clear acrylic display box
1x Clear acrylic base plate (slotted for your car's own screw)
2x Assembly screws (two sizes, spares included)
2x 3M adhesive pads
1x M2 hex key
1x Phillips screwdriver
1x Braided wrist lanyard
🚗 Will my car fit? Is a car included?
🚗 Will my car fit? Is a car included?
No car is included. Pit Pass ships empty on purpose — you pick which one earns the window. That's the whole point: nobody else's looks like yours.
It's built for standard 1:64 diecast — Hot Wheels, Matchbox, Mini GT, Tarmac, Inno64, Tomica.
Pit Pass is limited by height rather than length. Stand the car on a flat surface and measure roof to floor. Lifted trucks, rally cars with roof scoops and anything with a tall wing are the ones to check.
Swapping later is easy — the screws and both drivers are in the box. Just don't make a daily habit of it: the two cover screws thread into acrylic, and repeated removal will wear the thread. Hand-tighten only, never a power tool.
KP Design® Pit Pass
The display case that leaves the shelf.
One 1:64, sealed behind carbon and riding on your keys — everything a display box can’t do once you walk out the door.
The one you actually take with you
Every other case lives on a shelf. This one clips to your keys, your bag, your belt loop — the grail goes where you go.
Made for 1:64
Hot Wheels, Mini GT, Tarmac, Inno64. The chamber clears 22 mm — measure yours if it’s a lifted truck. Car not included.
You load your own car
Four screws and the hex key are in the box. Pick the car, seat it on the base plate, close it up.
Nobody else has one like yours
Every other display case decides the car for you. This one ships empty on purpose — you pick which one earns the window.
Real carbon fibre
Woven carbon plates front and back — real woven twill, not a printed wrap. Tilt it and the weave changes direction as the light moves across it.
Palm-sized
130 × 71 mm — it fills a palm. Big enough to read across a room, small enough to leave the house with.
FAQs
When will my order ship?
When will my order ship?
We prepare your order within 1–3 business days.After dispatch, your package will arrive in about 5–12 business days, depending on where you are located.
Does it come with the car shown in the photos?
Does it come with the car shown in the photos?
No — the car is for demonstration only. You get the display unit and accessories; the model vehicle isn't included.
With Pit Pass that's the whole idea: it ships empty on purpose so you choose which car earns the window. Nobody else's ends up looking like yours.
What scale models fit inside?
What scale models fit inside?
Everything we make is built around 1:64 scale diecast — Hot Wheels, Tomica, Matchbox, Mini GT, Tarmac, Inno64.
Infinity Garage takes cars up to about 75 mm long.
WindChaser takes cars under 75 mm long.
Pit Pass is limited by height rather than length — measure your car roof to floor. Lifted trucks, roof scoops and tall wings are the ones to check.
Anything under 23 mm fits.
Do you ship internationally?
Do you ship internationally?
Yes, we ship worldwide. Delivery time depends on your country — typically 5–12 business days after dispatch.
Complete the collection
-
SAVE 24%KP Design® Infinity Garage
Regular price $36.99Regular price $36.99 Sale priceUnit price per$49.0024% -
SAVE 31%KP Design® WindChaser
Regular price $129.00Regular price $129.00 Sale priceUnit price per$189.0031% -
SAVE 27%KP Design® Rotating Stage
Regular price $64.90Regular price $64.90 Sale priceUnit price per$89.9027% -
SAVE 25%KP Design® Pit Pass
Regular price $44.90Regular price $44.90 Sale priceUnit price per$59.9025%
