Short answer: the Lancer Evo is the rally-bred sedan that could humble supercars — and that big rear wing makes it a display standout. In 1:64 it's about 68 mm long, so it fits a single-car case — the Infinity Garage chamber (~120 × 75 × 65 mm) frames it with headroom for the wing. Show the rally stance side-on under cool-white light.
Why the Evo deserves a solo display
The Lancer Evo is a four-door giant-killer — WRC dominance, Tommi Mäkinen championships, and a road car that punched far above its class. Alongside its Subaru WRX rival, it defines rally-bred JDM. The aggressive wing and wide arches look purposeful on their own and cluttered on a crowded shelf — a natural single-hero piece.
Does a Lancer Evo fit a 1:64 display case?
The real Evo (Evo VI era) is about 4,350 mm long — at 1:64, roughly 68 mm. The tall rally wing is the thing to check.
| Dimension | Lancer Evo in 1:64 | Infinity Garage chamber |
|---|---|---|
| Length | ~68 mm | ~120 mm — fits, framed |
| Width | ~28 mm | ~75 mm — easy |
| Height (with wing) | ~23–26 mm | ~65 mm — clears the wing |
The big rear wing is the height limiter — the ~65 mm chamber clears it comfortably. (How to measure yours: size guide.)
Which 1:64 Evo should you display?
Widely cast: Mini GT, Inno64, and Tarmac Works all make excellent Evos — street versions, the iconic red WRC rally liveries, and Tommi Mäkinen editions. A clean red road car or a full rally livery — both fit the same case. (Brand guide: here.)
Display tips specific to the Evo
- Give the wing headroom. The tall rally wing is the tallest point — an enclosed case with ~65 mm clearance handles it.
- Side profile shows the arches. The Evo's wide rally stance reads best side-on.
- Rally red pops under cool-white. The classic red and white read true at ~4000K.
- Enclose the livery. Detailed rally decals and tampos stay crisp dust- and UV-free.
FAQ
How big is a Lancer Evo in 1:64?
About 68 mm long and ~28 mm wide — a standard 1:64 size, with the tall rally wing needing vertical clearance.
Does a Lancer Evo fit the Infinity Garage?
Yes — the ~120 × 75 × 65 mm chamber frames a ~68 mm Evo with headroom for the big wing.
What's the best 1:64 Lancer Evo?
Mini GT, Inno64, and Tarmac Works all make strong versions, including the red WRC rally liveries. All fit the same case.
How should I display a Lancer Evo?
Solo and side-on with wing headroom, under cool-white light in an enclosed case, so the rally stance is the centerpiece.
KP Design frames the rally legend — wing and all — rated 4.87★ by 8,000+ collectors. See the Infinity Garage.