{"product_id":"pitpass","title":"KP Design® Pit Pass","description":"\u003cp\u003eYour grail doesn't belong on a shelf where nobody sees it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePit Pass\u003c\/strong\u003e is a hand-built carry case that puts one 1:64 on your keys. Real carbon-fibre plates. Acrylic shell, sealed on every face. Reads from any angle.\u003c\/p\u003e\n\u003cp\u003eYou load your own car — its own screw through the base slot, or one of the included 3M pads if it has no hole. Five steps, one sitting. Both drivers are in the box.\u003c\/p\u003e\n\u003ch3\u003eWill it fit?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e22 mm of clearance inside.\u003c\/strong\u003e Measure your car's body height with the base removed — wings count.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✓ \u003cstrong\u003eSupercars \u0026amp; coupes\u003c\/strong\u003e — ~18–21 mm — fits easily\u003c\/li\u003e\n\u003cli\u003e⚠ \u003cstrong\u003eSaloons \u0026amp; hatches\u003c\/strong\u003e — ~22–23 mm — measure first\u003c\/li\u003e\n\u003cli\u003e✕ \u003cstrong\u003eSUVs, trucks, lifted\u003c\/strong\u003e — ~30 mm+ — won't fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic shell + cover\u003c\/li\u003e\n\u003cli\u003eCarbon-fibre plates × 2\u003c\/li\u003e\n\u003cli\u003eSelf-locking screws × 4 (male–female)\u003c\/li\u003e\n\u003cli\u003eCover screws × 2\u003c\/li\u003e\n\u003cli\u003eHex driver (M2)\u003c\/li\u003e\n\u003cli\u003eSmall Phillips driver\u003c\/li\u003e\n\u003cli\u003e3M adhesive pads × 4 — for no-screw cars\u003c\/li\u003e\n\u003cli\u003eBraided wrist strap + carabiner\u003c\/li\u003e\n\u003cli\u003eSplit keyring\u003c\/li\u003e\n\u003cli\u003ePrinted instruction card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCar not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWe don't recommend swapping cars too many times — the two cover screws thread into the acrylic, so undoing them repeatedly can strip them. Hand-tighten only; never use a power tool. To remove a 3M-mounted car, twist it off slowly — never pull straight up.\u003c\/p\u003e","brand":"KP Design","offers":[{"title":"Default Title","offer_id":51237876465700,"sku":"KP-PP","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5680\/1060\/files\/01-hero.png?v=1786382959","url":"https:\/\/keypitdesign.com\/products\/pitpass","provider":"KP Design","version":"1.0","type":"link"}